62 products
Universal Compatibility
The Cycle Satiator is not limited to charging a specific battery type. Instead this one charger model can be configured for virtually any lithium, nickle metal hydride, or lead acid battery pack. Our standard 48V 8A model will charge packs with up to a 63V max charge voltage (15s for lithium), while the 72V 5A model will work all the way to to 103V max (24s lithium).
A large and bright OLED display screen shows all your realtime charging statistics; you can see the total amp-hours and voltage along with a clear graphic indicating the approximate charge in the pack.
Impressive Power Density
At almost 0.5 watts / cm3, the Cycle Satiator packs 2-3 times more power per volume than most other chargers available. This translates into big league charging currents in a portable size device.
Fan Free Efficiency
The power electronics were carefully designed to reach 95% efficiency at full load, eliminating the need for a fan to get rid of waste heat and keep things cool. no more buzzing fan noise and no risk of charger meltdowns if the fan fails.
Sealed and Watertight
A gasketted enclosure and connector design strategy keeps the charger electronics protected in the face of rain, road spray, dust storms etc.
Compact and Narrow Size
The charger is less than 5cm high and 8cm wide, allowing it to fit easily in a saddle bag, under the rear rack, inside a frame triangle, or screwed to a chassis.
Power Factor Corrected
AC input runs from 100-240v, allowing for worldwide operation without any voltage selection switch, and features a 0.99 power factor which will please your utility grid too.
Benefits

Onboard Installation
The rugged, compact, and fan-free design allows the charger to be permanently mounted on the vehicle without risk of premature failure from vibration or exposure.
Seriously Fast Charging
With a 360 watt power output, the satiator can charge your batteries in half the time of typical 4amp ‘fast’ chargers. It delivers up to 8 amps with 24 and 36v packs, and 7 amps with 48v packs.
One Charger For All
No need for a different charger for each battery type, the satiator can be programmed to work correctly with almost any packs on hand. select from one of our common preloaded profiles or make your own custom charge profiles.
Quick Select
Have anywhere from one to dozens of preconfigured charging profiles active, enabling you to readily switch between output modes with just a quick button press.
Satiate for Enhanced Cycle Life
Most lithium batteries are capable of vastly improved cycle life if they are not fully charged to saturation all the time, but at the expense of reduced range.

With the cycle satiator, you can program your primary profile to give an 80% charge, and have a secondary profile that does a 100% charge when you need full range. Then have the best of both worlds, a battery that lasts thousands of cycles but still goes the distance when you need it. For more details, read here.

Future Proof
The firmware can be upgraded in the field, and along with the flexible custom profiles this means your cycle satiator is ready for whatever batteries the future has in store.
Designed in Canada
The engineering and design team behind the satiator are avid ebike users with years of experience in electric vehicle technology. This product is the charger they always wished they had, and we hope you feel the same way too.
For OEM and Businesses
In addition to electric bike enthusiasts, this charger is of great value to ebike businesses that need to manage a range of battery packs, and for oems wanting to distinguish their vehicle with a rugged and modern full featured charger.
Certifications
This device is CSA, UL, and CE listed, meaning it has passed rigorous safety and reliability tests, and can be legally resold in most jurisdictions.
Specifications
Electrical
Input Range | 100-240VAC 50-60hz |
Output Range 4808 | 12-63V, 0-8A, 0-360 W |
Output Range 7205 | 20-103V, 0-5A, 0-360 W |
Operating Efficiency | 95% @ 230v, 94% @ 120v |
Power Factor | > 99% |
No Load AC Power | < 1 watt |
Output Leakage | < 100uA |
Mechanical
Mechanical Dimensions | 237 x 78 x 48 mm |
Mounting Holes | 5mm flange slots 220mm apart |
Weight | 1.06 kg (1.33 kg with ac-dc cords) |
Chassis Material | Diecast Aluminum |
Interface
Dual tactile push buttons for field setup |
128x64 OLED graphical display for charge / profile info |
LIN bus on signal pin for pc communication and firmware updates (requires custom cable) |
Regulatory Certifications
Safety | ul 1012, csa c22.2 no. 107.2, ce / iec 60335-1/2-29 |
Emissions | FCC part 15 b, en55014, en 61000-3-2, en 61000-3-3 |
Immunity | en 61000-4-2/-3/-4/-5/-6/-11 |
Plug-N-Play headlight upgrade for Super73 motorbikes. This headlight has been customized to be a direct replacement for the headlight on the S2 and RX. It features a wider and brighter beam pattern with 2 settings.
There is a switch to toggle between daytime running lights and the main LED driving lights. It connects to the same plug as the OEM headlight, and offers an improved function and aesthetic.
High beam features daytime running lights, LED standard lights, and high beam lights. Toggle between each light option with our upgraded switch.
- Osram 6000K led's
- Top/bottom DRL (daytime running lights)
- Handlebar switch for DRL and main lights (uses stock controller for on/off)
- 22awg wiring to accommodate increased amperage
Includes:
- 6" Osram LED headlight
- Aluminum housing bracket
- Fork brackets
- Handlebar switch (3 positions 1-0-2)
- 3 pin plug compatible with factory plug
- Rock guard grill
tools needed for installation:
- adjustable wrench
- hex key set

The most convenient way to leave your helmet behind. Access the hidden channel behind the logo mark, and pop your U-Lock or chain lock through. Backed by our Anti-Theft Guarantee.
Lock it in with a one hand fastener guaranteed to leave your finger pinch-free. Safety certified, German engineered.
Dial in the proper fit for every ride. With our easily adjustable fit system, you can be confident that your helmet is snug and secure.
Stay comfortable and sweat-free with these eco-friendly microfiber vegan straps, created with animals and the environment in mind.
Ventilation without the sci-fi design. You’ll keep cool with seven air vents and three
cooling channels.
FIT GUIDE
Every head is different, but with our helmets' integrated dial fit system, it's easy to make small adjustments for a comfortable fit. Just turn the dial clockwise to tighten or counterclockwise to loosen. You can also remove some or all of the interior fit pads without affecting the safety of your lid to accomplish your preferred fit.
Kanebilt has created a custom anodized aluminium mounting plate that screws onto the rear side of the bike. The bag is then securely attached with nylon loops and a partial molle mounting solution.
- Shell: waterproof ballistic 900D nylon
- Zippers: YKK aquaguard
- Weight limit: 10 lbs each
- Dimensions: 10" x 6" x 2"
- Compatible with: Super73 R, RX, S2 and ZX
Includes: Aluminum mounting plate, all necessary hardware, and saddlebag.
Plug-N-Play headlight upgrade for Super73 motorbikes. This headlight has been customized to be a direct replacement for the headlight on the S2 and RX. It features a wider and brighter beam pattern with 2 settings.
There is a switch to toggle between daytime running lights and the main LED driving lights. It connects to the same plug as the OEM headlight, and offers an improved function and aesthetic.
High beam features daytime running lights, LED standard lights, and high beam lights. Toggle between each light option with our upgraded switch.
- Osram 6000K led's
- Top/bottom DRL (daytime running lights)
- Handlebar switch for DRL and main lights (uses stock controller for on/off)
- 22awg wiring to accommodate increased amperage
Includes:
- 6" Osram LED headlight
- Aluminum housing bracket
- Fork brackets
- Handlebar switch (3 positions 1-0-2)
- 3 pin plug compatible with factory plug
- Rock guard grill
tools needed for installation:
- adjustable wrench
- hex key set
Plug-N-Play headlight upgrade for Super73 motorbikes. This headlight has been customized to be a direct replacement for the headlight on the RX. It features a wider and brighter beam pattern with 2 settings. There is a switch to toggle between daytime running lights and the main LED driving lights. It connects to the same plug as the OEM headlight, and offers an improved function and aesthetic.
High beam upgrade features daytime running lights, LED standard lights, and high beam lights. Toggle between each light option with our upgraded switch.
- Cree 6000K led's
- 3000 lumen low beam / 5000 lumen high beam
- Halo DRL (daytime running lights)
- Handlebar switch for DRL and main lights (uses stock controller for on/off)
- 22awg wiring to accommodate increased amperage
Includes:
- 6" Cree LED headlight
- Aluminum housing bracket
- Fork brackets
- Handlebar switch (3 positions 0/1/2)
- 3 pin plug compatible with factory plug
tools needed for installation:
- adjustable wrench
- hex key set

The most convenient way to leave your helmet behind. Access the hidden channel behind the logo mark, and pop your U-Lock or chain lock through. Backed by our Anti-Theft Guarantee.
Lock it in with a one hand fastener guaranteed to leave your finger pinch-free. Safety certified, German engineered.
Dial in the proper fit for every ride. With our easily adjustable fit system, you can be confident that your helmet is snug and secure.
Stay comfortable and sweat-free with these eco-friendly microfiber vegan straps, created with animals and the environment in mind.
Ventilation without the sci-fi design. You’ll keep cool with seven air vents and three
cooling channels.
FIT GUIDE
Every head is different, but with our helmets' integrated dial fit system, it's easy to make small adjustments for a comfortable fit. Just turn the dial clockwise to tighten or counterclockwise to loosen. You can also remove some or all of the interior fit pads without affecting the safety of your lid to accomplish your preferred fit.

The most convenient way to leave your helmet behind. Access the hidden channel behind the logo mark, and pop your U-Lock or chain lock through. Backed by our Anti-Theft Guarantee.
Lock it in with a one hand fastener guaranteed to leave your finger pinch-free. Safety certified, German engineered.
Dial in the proper fit for every ride. With our easily adjustable fit system, you can be confident that your helmet is snug and secure.
Stay comfortable and sweat-free with these eco-friendly microfiber vegan straps, created with animals and the environment in mind.
Ventilation without the sci-fi design. You’ll keep cool with seven air vents and three
cooling channels.
FIT GUIDE
Every head is different, but with our helmets' integrated dial fit system, it's easy to make small adjustments for a comfortable fit. Just turn the dial clockwise to tighten or counterclockwise to loosen. You can also remove some or all of the interior fit pads without affecting the safety of your lid to accomplish your preferred fit.
Universal Compatibility
The Cycle Satiator is not limited to charging a specific battery type. Instead this one charger model can be configured for virtually any lithium, nickle metal hydride, or lead acid battery pack. Our standard 48V 8A model will charge packs with up to a 63V max charge voltage (15s for lithium), while the 72V 5A model will work all the way to to 103V max (24s lithium).
A large and bright OLED display screen shows all your realtime charging statistics; you can see the total amp-hours and voltage along with a clear graphic indicating the approximate charge in the pack.
Impressive Power Density
At almost 0.5 watts / cm3, the Cycle Satiator packs 2-3 times more power per volume than most other chargers available. This translates into big league charging currents in a portable size device.
Fan Free Efficiency
The power electronics were carefully designed to reach 95% efficiency at full load, eliminating the need for a fan to get rid of waste heat and keep things cool. no more buzzing fan noise and no risk of charger meltdowns if the fan fails.
Sealed and Watertight
A gasketted enclosure and connector design strategy keeps the charger electronics protected in the face of rain, road spray, dust storms etc.
Compact and Narrow Size
The charger is less than 5cm high and 8cm wide, allowing it to fit easily in a saddle bag, under the rear rack, inside a frame triangle, or screwed to a chassis.
Power Factor Corrected
AC input runs from 100-240v, allowing for worldwide operation without any voltage selection switch, and features a 0.99 power factor which will please your utility grid too.
Benefits

Onboard Installation
The rugged, compact, and fan-free design allows the charger to be permanently mounted on the vehicle without risk of premature failure from vibration or exposure.
Seriously Fast Charging
With a 360 watt power output, the satiator can charge your batteries in half the time of typical 4amp ‘fast’ chargers. It delivers up to 8 amps with 24 and 36v packs, and 7 amps with 48v packs.
One Charger For All
No need for a different charger for each battery type, the satiator can be programmed to work correctly with almost any packs on hand. select from one of our common preloaded profiles or make your own custom charge profiles.
Quick Select
Have anywhere from one to dozens of preconfigured charging profiles active, enabling you to readily switch between output modes with just a quick button press.
Satiate for Enhanced Cycle Life
Most lithium batteries are capable of vastly improved cycle life if they are not fully charged to saturation all the time, but at the expense of reduced range.

With the cycle satiator, you can program your primary profile to give an 80% charge, and have a secondary profile that does a 100% charge when you need full range. Then have the best of both worlds, a battery that lasts thousands of cycles but still goes the distance when you need it. For more details, read here.

Future Proof
The firmware can be upgraded in the field, and along with the flexible custom profiles this means your cycle satiator is ready for whatever batteries the future has in store.
Designed in Canada
The engineering and design team behind the satiator are avid ebike users with years of experience in electric vehicle technology. This product is the charger they always wished they had, and we hope you feel the same way too.
For OEM and Businesses
In addition to electric bike enthusiasts, this charger is of great value to ebike businesses that need to manage a range of battery packs, and for oems wanting to distinguish their vehicle with a rugged and modern full featured charger.
Certifications
This device is CSA, UL, and CE listed, meaning it has passed rigorous safety and reliability tests, and can be legally resold in most jurisdictions.
Specifications
Electrical
Input Range | 100-240VAC 50-60hz |
Output Range 7205 | 20-103V, 0-5A, 0-360 W |
Operating Efficiency | 95% @ 230v, 94% @ 120v |
Power Factor | > 99% |
No Load AC Power | < 1 watt |
Output Leakage | < 100uA |
Mechanical
Mechanical Dimensions | 237 x 78 x 48 mm |
Mounting Holes | 5mm flange slots 220mm apart |
Weight | 1.06 kg (1.33 kg with ac-dc cords) |
Chassis Material | Diecast Aluminum |
Interface
Dual tactile push buttons for field setup |
128x64 OLED graphical display for charge / profile info |
LIN bus on signal pin for pc communication and firmware updates (requires custom cable) |
Regulatory Certifications
Safety | ul 1012, csa c22.2 no. 107.2, ce / iec 60335-1/2-29 |
Emissions | FCC part 15 b, en55014, en 61000-3-2, en 61000-3-3 |
Immunity | en 61000-4-2/-3/-4/-5/-6/-11 |
Type of light: | Bikelight |
Light output: | 7200 Lumens |
Remote: | Bluetooth with remote switch. App applicable. |
Runtime: | 1:20 h |
Runtime Max: | 110 h |
Reach FL1: | 840 m |
Battery: | 6.9 Ah SmartCore (14.4V Alpha) |
Capacity indicator: | with SmartCore |
Weight incl. battery: | 670 g |
Delivery content: | Lamphead Alpha, 6.9 Ah SmartCore battery (14.4V system Alpha), Charger One Alpha, Powersupply 24V, Short velcro, Long velcro, Manual |

The most convenient way to leave your helmet behind. Access the hidden channel behind the logo mark, and pop your U-Lock or chain lock through. Backed by our Anti-Theft Guarantee.
Lock it in with a one hand fastener guaranteed to leave your finger pinch-free. Safety certified, German engineered.
Dial in the proper fit for every ride. With our easily adjustable fit system, you can be confident that your helmet is snug and secure.
Stay comfortable and sweat-free with these eco-friendly microfiber vegan straps, created with animals and the environment in mind.
Ventilation without the sci-fi design. You’ll keep cool with seven air vents and three
cooling channels.
FIT GUIDE
Every head is different, but with our helmets' integrated dial fit system, it's easy to make small adjustments for a comfortable fit. Just turn the dial clockwise to tighten or counterclockwise to loosen. You can also remove some or all of the interior fit pads without affecting the safety of your lid to accomplish your preferred fit.
Built with a moto inspired cross bar with 22.2mm diameter so you can mount phone holders and other bar mounted accessories.
Material 6061 heat treated aluminum alloy
Clamp diameter 22.2 mm
Width 680 mm
Rise 191 mm
Sweep 16.7 degrees back, 4 degrees up
Compatible with the Super73 R, RX, ZX, S2 and S1.
The Marko Helmets Tandem bike helmet consists of a robust, wraparound polycarbonate shell with CE EN1078 approval and a breathable, removable and washable fabric interior foam.
The Tandem jet helmet with its vintage look guarantees effective protection of the head, especially the skull, in case of a fall or slip, as it gently absorbs the impact. Easy to use, you will have to adjust the helmet to your head with the help of its adjustable micrometric closure.
This helmet, for chic cyclists and in the air of time, has a modern and urban design in three pretty colors, both sober and elegant to ride in the city and go to appointments.
The Marko Helmets Tandem bike helmet consists of a robust, wraparound polycarbonate shell with CE EN1078 approval and a breathable, removable and washable fabric interior foam.
The Tandem jet helmet with its vintage look guarantees effective protection of the head, especially the skull, in case of a fall or slip, as it gently absorbs the impact. Easy to use, you will have to adjust the helmet to your head with the help of its adjustable micrometric closure.
This helmet, for chic cyclists and in the air of time, has a modern and urban design in three pretty colors, both sober and elegant to ride in the city and go to appointments.
The Marko Helmets Tandem bike helmet consists of a robust, wraparound polycarbonate shell with CE EN1078 approval and a breathable, removable and washable fabric interior foam.
The Tandem jet helmet with its vintage look guarantees effective protection of the head, especially the skull, in case of a fall or slip, as it gently absorbs the impact. Easy to use, you will have to adjust the helmet to your head with the help of its adjustable micrometric closure.
This helmet, for chic cyclists and in the air of time, has a modern and urban design in three pretty colors, both sober and elegant to ride in the city and go to appointments.
NTEGRATED USB PLUG
No charging cable is required for your Blinder, its integrated USB plugs directly into USB ports. It has a charge time of 4 hours. When your Blinder is running low on battery, a red led will light up next to the button. This ring will turn green and then turn off once the Blinder is fully charged and ready to go.
TOOL-LESS MOUNT
Blinder lights comes with a tool-less removable silicone strap for bars and seat posts 22 – 32mm in diameter. A large strap is also provided that will fit tubes and head tube profiles with a circumference of up to 200mm. Knog’s tool-less mounting system makes attaching your light incredibly simple and using silicone straps means there’ll be no chance of damaging your bikes frame or beloved paint job.
EASY ON, EASY OFF
Removing your Blinder for charging or security purposes is a doddle with our handy clasp removal system. Strong enough to hold your light firmly in place when in use and big enough to use even when wearing gloves in colder conditions, this is a king amongst clasps.
BLINDINGLY BRIGHT
Producing 200 lumens of light output makes this Blinder a seriously bright option for any cyclist. Efficient Chip on Board (COB) LEDs provide maximum brightness level for up to 90% of the battery burn time.
Technical Characteristics
Dimensions: 31 x 31 x 14mm
Urban use
Maximum output of 20 lumens (front) and 11 lumens (rear)
5 possible modes: constant, fast flash, slow organic flash, fast organic flash and energy saving flash
Autonomy: 10 hours
Visible at 800 meters
Wireless USB charging: 2.5 hours
Can be positioned on round or aero tubes from 22mm to 32mm thanks to the interchangeable straps

UNRIVALED LED TECHNOLOGY
Blinder Mini Niner’s surface mounted LEDs output 20 lumens at the front and 11 at the rear. With a 90° beam and an integrated reflector for added visibility, you’ll be seen from up to 800m away. They have a run time of up to 11 hours on eco-flash mode and come with 5 light modes, steady high, steady low, strobe, fancy flash and eco-flash.
SIMPLE MOUNTING
With a weight of only 18 grams each, the lights connect securely to handlebars and frames of 22-32+mm with a tool-less attachment. Blinder Mini Niner uses strong silicone and interchangeable straps to give you the perfect fit. And with a notch in the rear of the lights – they sit well on posts and bars.
Nine LED lights
LED: The Blinder Mini Chippy uses surface mounted LEDs outputting 20 Lumens (Front) & 11 Lumens (Rear)
100% WATERPROOF: Rain or shine, the Mini Chippy is ready for it all with it's 100% waterproof construction
CABLE FREE: Just unclip, remove from seat post or handlebars and plug straight in to any available USB socket to recharge
UNIVERSAL STRAP: Interchangeable straps, 3x for rear and 2x for front, notched for AERO posts
RECHARGE: Takes only 2.5 hours to recharge fully
Slide the Bike Tracker into the reflector and attach it to your seatpost. In case of suspicious movement or attempted theft, you will be notified immediately on your smartphone. In the event of theft, our teams assist the police. Several hundred stolen vehicles have already been retrieved!
An essential device to monitor your bike in complete discretion!
In urban areas, one in two cyclists has already had their bike stolen... Nearly 400,000 thefts were reported in 2016 in France, i.e. one per minute!
Whether you are a fan of the Tour de France, a leisure cyclist or a bike commuter (person who uses their bike to get to work), you probably know all about the dread of stolen bicycles. More and more French people are concerned about the safety of their vehicle, whether it is a bicycle or one of these new personal light electric vehicles (PLEV).
The Invoxia Bike Tracker is the best solution to enjoy this mode of transport serenely and safely. It also allows you to lock your two-wheeler in the street without the fear of it disappearing, even at night. Discreet and lightweight, this connected reflector can be easily attached to the seat post or luggage rack for better visibility on the road.
The Invoxia Bike Tracker acts as an active mobile anti-theft device during trips and when the bike is parked: once installed, it can detect vibrations after a prolonged period of inactivity (>5min) to warn the user and allow them to intervene in time. It also helps prevent damage, notifying the owner if the vehicle is pushed or knocked over when parked.
Unlike other trackers that require an expensive monthly subscription, the Bike Tracker is available at no extra cost: a 3-year subscription to the LoRa or Sigfox low-power network is included in the retail price.
The LITE is bright enough to light your way in complete darkness and get you seen in broad daylight. The five horn modes (ranging in volume and tone from 95 to 120 dB) mean you can actively let drivers know where you are. The remote trigger, which sits under the rider’s thumb, means it’s there when you need it. The micro USB rechargeable battery gives you an easy way to recharge between rides.
140 decibels is the equivalent sound of a jet engine and 4 times louder than the nearest competitor so you can alert cars, buses, lorry drivers & pedestrians to your presence. It has two sounds - a piercing 'road' mode and a lower pitched 'park' mode for cycle paths. The remote trigger means it is safe and easy to use when braking. It is easy to install and remove and the mount fits all bikes. Completely weather proof (although not submersible!)
Installation en 30 secondes
Fixer-Régler-Tourner, 3 étapes simples et vous êtes prêt à partir. Fixez simplement le Bryton Sport Mount sur le guidon de votre vélo. Réglez l'angle pour obtenir une expérience de visualisation parfaite. Puis serrez les vis à l'aide en utilisant le tournevis en L fourni pour le verrouiller solidement en place.
Vue d'affichage naturelle
Le Bryton Sport Mount est conçu pour procurer une vue d'affichage plus naturelle que votre support guidon habituel. Il permet également de réduire la résistance de l'air pendant les entraînements.
Qualité de fabrication avancée
Le Bryton Sport Mount est conçu pour une utilisation intensive. Fabriqué en alliage d'aluminium, il est plus robuste et plus durable.
Modèle | Sport Mount |
Dimensions de l'article | 50.1 x 116 x 38.1mm |
Dimensions de l'emballage | 110 x 188.75 x 39mm |
Poids de l'article | 31g |
Poids de l'emballage | 46g |
Compatibilité | Guidons de 31,8 mm |
Compteur vélo compatible | Compteur Rider Bryton |
Écran agrandi et optimisé
Doté d’un grand écran 2”, le Rider 15 NEO permet de voir encore plus nettement les données grâce à des champs plus lisibles. L'écran de haute qualité collé optiquement permet une lecture claire sous tous les angles quelle que soit l’intensité lumineuse.
Précision absolue
Prenant en charge le système GNSS (Global Navigation Satellite System), le Rider 15 NEO assure une couverture satellite et une précision plus accrue quel que soit le lieu (sous-bois, zones montagneuses ou urbaines…) tout en proposant, en détails, de nombreuses régions grâce à l’intégration des satellites GPS (États-Unis), Galileo (Europe) et QZSS (Japon).
Batterie puissante
Équipé d’une puissante batterie de offrant 16 heures d’autonomie et pouvant être chargée par batterie externe, le Rider 15 NEO vous permet d'affronter toutes les distances et tous les sommets !
Notifications intelligentes
Consultez les notifications de votre téléphone (appels, SMS, e-mails…) directement sur le Rider 15 NEO après une association par Bluetooth avec l’application Bryton Active (disponible sur iOS et Android). Cette fonction fait du Rider 15 NEO le compagnon de cyclisme intelligent ultime pour tous les utilisateurs Bryton.
Brooks Slender Leather Grips feature vegetable tanned leather tape, a naturally timeless material for long lasting durability and great looks, perfect for straight bar bicycles. The design incorporates an aluminium shell around which the bar tape is wrapped in the manner of traditional handlebar tape. The leather is then held in place by aluminium and steel clamps which can be removed in the event that the tape requires replacement.
- Natural leather
- Comfortable to the touch
- Made to last
FEATURES
- Vegetable tanned leather tape
- Aluminium shell
- Aluminium and steel clamp
IDEAL FOR
- Commuting in the city
- Travelling the globe
- Urban cycling